The easy way to view and manage your insurance policy on the go.

Easily manage your cover, view your documents, and much more with the Admiral app.

Get friends or family on board with Admiral to pocket up to £75.

Earn up to £75 by introducing your friends and family to Admiral. The more you get on board, the more you're rewarded!

Cars for £150 to £250 per month

Take a look at cars we financed between £150 and £250 per month.

3 May 2022 | Updated 5 May 2022 | 5 minute read

We’re looking at how to put up three common types of shelves: floating, bracketed and adjustable.

Use a 3-in-1 pipe, cable and stud detector before drilling any holes. It alerts you if there’s a pipe or cable present and can help you find a stud to secure your shelf to for extra support.

Now you’ve got the safety stuff out of the way, let’s hang a shelf.

Don’t forget the most important thing, the shelf! They normally come with brackets and screws. If you’re attaching the shelf to a masonry wall, you’ll also need wall plugs.

You can attach shelves to masonry walls or stud walls:

Getting a strong shelf fit requires more than just effort. If you’re drilling into masonry walls, we recommend using 50mm screws and a good hammer-action drill with a masonry bit.

With stud walls, make sure the screw goes into the noggins or studs; the fussier you are here, the stronger your shelf will be.

If you need to mount a shelf to plasterboard, without studs, you’ll need strong wall plugs specific for this type of wall. We don’t recommend storing heavy objects on plasterboard walls as it isn’t as secure. We also recommend using a bracketed shelf for maximum safety.

You also need to consider what you’re putting on your shelves. Is it heavy? If so, try using stronger screws, around 38mm or 50mm in size. You should opt for the heaviest screws your bracket can handle.

The two most common types of wall-hung shelves are a bracketed shelf and a floating shelf. Regardless of which type you choose, always check the packaging for the maximum weight load.

With a bracketed shelf (also known as a fixed shelf), the supporting brackets are visible, usually below the shelf. A floating shelf’s brackets are hidden inside the shelf.

Your choice will depend on your preferred aesthetic, but you should also consider what you’re putting on the shelf.

Although neater looking, floating shelves aren’t as strong as their bracketed counterparts. They can generally hold 15-25 kg, whereas bracketed shelves can hold up to triple that depending on the bracket type.

More importantly, you need to choose the correct wall plugs for your wall type. If in doubt, speak to a staff member at your local hardware store.

Adjustable shelves are becoming more common, so we’ll also cover how to put those up too.

As floating shelves are less secure than bracketed ones, attaching your shelf to a masonry wall or directly into studs is crucial to keep it secure.

1. Once you’ve picked a spot – and checked for pipes and cables – put the metal bracket strip against the wall at your desired height, making sure it’s straight with a spirit level. Mark the centre position and the securing holes on the wall with a pencil.

If there are any holes on the prongs, make sure they’re facing down so you can secure your shelf later on.

2. Work out how deep you’ll need to drill by lining up your drill bit with a wall plug. You can mark this length on the drill bit by attaching masking tape where you need to stop.

3. Put on your goggles and drill holes where you’ve made your marks, to the depth where you reach the masking tape.

4. If required, tap your wall plugs into the holes and press them in so that they’re flush to the wall. You can hit the plugs lightly a hammer to help.

5. Use the screws provided to fasten the bracket into place, then slot the shelf onto the two bars sticking out from the brackets.

If your floating shelf has pre-drilled holes on the underside, you need to attach the screws to holes in the bar, and then cover the screws with the supplied caps or stickers for a seamless look.

The process is very similar to the floating shelf, except the brackets are exposed, and take up more room beneath the shelf.

1. Pick a spot, check for pipes and cables, and put the first bracket against the wall at your desired height.

Use a spirit level to make sure it’s straight and mark the securing holes with a pencil from the top hole down.

2. Measure the distance to the next bracket. Make sure it’s straight with your spirit level and mark its position. Then place the bracket in position, check it’s level, and again mark the holes from the top down.

3. Put on your goggles and drill holes where you’ve made your marks, to the depth where you reach the masking tape.

4. If required, tap your wall plugs into the holes and press them in so that they’re flush to the wall. You can hit the plugs lightly a hammer to help.

5. With the screws provided, fasten the brackets into place. Check that they’re level one more time, before placing the shelf board on the brackets.

6. If your shelf kit has premarked holes on the bottom of the board, skip this step. Use a tape measure to make sure that the board is centred – the measurement on either side of the brackets should be the same.

Mark where the screws will go on the shelf board with a pencil using the holes on the brackets.

7. Drill pilot holes in the shelf if they aren’t already in place, making sure you avoid going all the way through the board. Screw in the fixing screws and your new shelf is ready to decorate.

1. As mentioned above, ensure there are no pipes or wires in the shelving area.

2. Use a spirit level to draw a line down the wall where the first track of the frame is positioned. Measure and do the same for the second. The instructions should inform you of the distance needed.

3. Drill through the fixing holes and loosely fit the screws. Mark each fixing hole and secure the screws well, checking the bracket is straight with a spirit level. 

4. Grab your shelf and mark the drilling points. Drill the holes, as per manufacturer instructions, place the shelf and turn the screws with a screwdriver.

5. With your bracket and shelves secured, you should now be able to slot in any additions. Always refer to manufacturer instructions. 

Being covered by home insurance takes the pressure off. Of course, we trust you; you won’t have any nightmares putting up a shelf. You’re a pro now, after all.

However, to avoid the worst, try out our home maintenance planner . You can compare the costs of hiring a professional, make a checklist and discover your next DIY project.

It says nothing about your DIY skills - promise.  

Need more home improvement advice? Then discover more DIY tips for home maintenance.

https://admiral.com/magazine/home/guides/how-to-put-up-a-shelf

Admiral is a trading name of EUI Limited. (Reg No: 02686904). EUI Limited is a subsidiary of Admiral Group plc and is authorised and regulated by the Financial Conduct Authority (Firm reference number: 309378). These details can be confirmed by visiting the Financial Services Register, www.fca.org.uk/register. EUI Limited acts for, and on behalf of, other regulated insurance companies. Further details may be provided on request. Admiral One, Admiral Loans, Admiral Money and Admiral Car finance are all trading names of Admiral Financial Services Limited. Admiral Financial Services Limited (Reg No: 10255225) is a subsidiary of Admiral Group plc and is authorised and regulated by the Financial Conduct Authority (Firm reference number: 771862). These details can be confirmed by visiting the Financial Services Register, www.fca.org.uk/register Veygo is a trading name of Able Insurance Services Limited. Able Insurance Services Limited (Reg No: 2890075) is a subsidiary of Admiral Group plc and is authorised and regulated by the Financial Conduct Authority (Firm reference number: 311649). These details can be confirmed by visiting the Financial Services Register, www.fca.org.uk/register Admiral Group plc is registered in England and Wales at Tŷ Admiral, David Street, Cardiff. CF10 2EH (Reg No: 03849958).